The following links represent component and IC manufacturers and other companies with whom Modelithics works closely to provide top-quality models for RF/microwave design.
If you are a supplier of RF/Microwave devices, please contact us about joining our Modelithics Vendor Partner (MVP) program, and having your company linked below, by sending an inquiry to firstname.lastname@example.org .
Show by Company Type
Component & IC Vendors
EDA Software Providers
|Arlon, Inc. Materials for Electronics Division |
Arlon Microwave Materials specializes in products made from fluoropolymers i.e. PTFE, ceramic-filled fluoropolymers, ceramic-filled hydrocarbon thermosets, and other materials that deliver the electrical performance needed in frequency-dependent circuit applications. These products are supplied as copper-clad laminates with bonding plies, or prepregs, for production of multilayer printed circuits. Arlon has over "50 years of experience in microwave materials", today providing products that are used to make combiner boards and feed networks for microwave applications as well as base station antennas and power amplifier boards for the wireless telecommunications infrastructure market.
Arlon Electronic Substrates group manufactures Polyimide, ThermountŪ,Multifunctional Epoxy, and High Performance Resin Laminates and Pre-Pregs for High Temperature, High Performance, Low Thermal Expansion, Thermally Conductive, and High Density Interconnects. These products are valued by the Burn-In board, Down-Hole, Military Electronics, and other High Temperature Markets.
|The Automatic RF Techniques Group (ARFTG) is a technical organization interested in all aspects of RF and Microwave test and measurement.|
The most important part of the ARFTG experience is the opportunity to interact one-on-one with colleagues, experts and vendors of the RF and microwave test and measurement community. Whether your interests include high-throughput production or one-of-a-kind metrology measurements, complex systems or simple circuit modeling, small signal S-parameter or large-signal non-linear measurements, phase noise or noise figure, DC or lightwave, you will find a kindred spirit or maybe even an expert.
|Electro-Photonics LLC is a global supplier of high frequency components and design services. Our products include wire bondable passive components, coaxial products, printed antennas and very useful test boards for evaluating RF/Microwave components. We custom design passive components and offer high frequency packaging services. The Electro-Photonics team can support your small R&D design requirements and save you valuable design and characterization time. Available are chip and wire assembly services in a 10K clean room and high frequency measurements to 110GHz.|
|everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.|
|Our target audience includes engineers, managers, educators and other
technical personnel involved in the design and development of products
and technologies at high frequencies and high speeds. Our coverage of
this area of engineering includes all possible applications, which can
change rapidly as new, creative ideas are developed into products. MVP page > > |
|The Microwave Measurement Technical Committee promotes activities related to microwave measurement technology and science. This includes furthering the investigation, understanding, and the art and practice of microwave measurement. The committee works to increase both the visibility and vitality of the measurement community within the IEEE Microwave Theory and Techniques Society MTT-S. It stimulates, develops, and sponsors quality technical sessions and workshops within the MTT-S International Microwave Symposium IMS and other venues, provides web-based technical measurement forums moderated by experts, develops quality educational tools, and develops other ways of disseminating information related to microwave measurements. The technical committee will work with the MTT-S Standards Coordinating Committee in developing and establishing IEEE standards and best measurement practices in the microwave and millimeter-wave field.|
|The Consortium is a pro-active organization of WIRELESS AND RF PRODUCT OEM`s and their SUPPLIERS. The IWPC mission is to facilitate communication up and down the supply chain, to: identify and clarify markets and product/service opportunities, reduce costs, improve performance, and decrease time to market ... with an emphasis on packaging and interconnect technologies.|
|"Jan Verspecht b.v.b.a. " is a hightech company based in Steenhuffel, Belgium. The company was established in January 2003 by Jan Verspecht, who has more than 12 years of experience in the RF and microwave instrumentation industry. The company specializes in education and consulting related to the measurement and modeling of nonlinear microwave components and systems. Example applications and topics are: nonlinear distortion, fundamental and harmonic loadpull, "HotS22", "LargeSignal Network Analysis", spectral regrowth, blackbox frequency domain modeling, harmonic phase calibration, current and voltage waveform measurements, highspeed digital signal integrity, and broadband oscilloscope calibrations.|
|Microwave JournalŪ is the resource for working RF, Microwave and Wireless engineers through print, online and industry events. The magazine reaches 50,000 readers with the most respected editorial content in its field. Engineers are provided with the latest in technical information, special reports, new products and news shaping the current and future landscape of RF/Microwave communications. Engineers also turn to Microwave JournalŪ online at mwjournal.com, which was established in 1993 and has more than 50,000 registered users. Additionally, Microwave JournalŪ manages the world`s largest and industry leading trade-shows including the IEEE MTT-S International Microwave Symposium, European Microwave Week and IEEE MTT-S Radio and Wireless Symposium. MVP page > > |
|Articles and technical information about higher frequency RF - providing news, products and industry coverage. Our goal is to provide concise, useful information that will help our readers stay informed and get their jobs done more quickly and efficiently. MVP page > > |
|QuinStar Technology is an ISO 9001:2000 certified millimeter-wave technology company offering innovative product solutions. QuinStar was founded in March 1993 by seasoned managers who gained extensive experience in millimeter-wave while working at major aerospace firms. QuinStar has expertise with millimeter-wave products, microelectronic assembly, rapid prototyping and mass customization. We serve established as well as emerging markets and system applications in the commercial, scientific and defense arenas.|
|RF Globalnet is the Internet`s leading source of technical information for the RF/microwave design industry, serving the needs of engineering professionals since 1996. Source product data, download demo software, read industry headlines and technical papers, discuss your design problems with other engineers, and more -- all on RF Globalnet. |
Want the latest RF/microwave news, feature articles, and product announcements delivered right to your inbox? Sign up for the free RF Globalnet email newsletter: http://www.rfglobalnet.com/content/membership/register.asp?vtfc=topnav2&referrer=modelithics MVP page > >
|OUR MISSION:  |
|Taconic is a global manufacturer of high performance copper clad PTFE coated fiberglass and PTFE coated fiberglass/ceramic laminates for the microwaves & RF and high speed digital market places with sales and manufacturing offices located in New York, California, Ireland and Korea. Laminates are available with dielectric constants ranging from 2.17 to 10.0 in a multitude of sizes and dielectric thicknesses. |
For more information, visit: www.4taconic.com or Email email@example.com
|Transim is the worldwide leader in developing online design and support solutions for manufacturers and suppliers of RF and microwave, analog and mixed-signal, embedded, and electro-mechanical products. Coporate headquarters are located in Portland, Oregon.Start your design today and go from requirements to working prototype in minutes www.transim.com|
|The University of South Florida Wireless and Microwave Center excels in all aspects of RF & Microwave Education with applications to commercial wireless and military communications, radar and remote sensing. Research topics funded by more than than ten industry affiliates include precision noise, nonlinear and Sparameter measurements covering broad frequency ranges DC to 110 GHz, MEMs design and fabrication for RF & Microwave applications, MMIC design and experimental verification, wireless system CAD modeling, and fabrication and testing of widebandgap devices e.g. SiC for microwave high power amplifiers. WAMI`s indepth curriculum begins with an intensive undergraduate laboratory course required of all BSEEs that instructs all on the use of microwave instrumentation and CAE software in the context of an RF radio receiver. This is followed by two undergraduate/graduate courses in RF & Microwave Circuit Design, two graduate courses in MMIC Design, and graduate courses in RF & Microwave Measurements including detailed instruction on microwave wafer probing, Sparameter, noise, power, and distortion measurements, antennas, and numerical EM techniques, in addition to a strong complementary curriculum in DSP, communications and signal processing.|